Hyundai Getz>> Electric equipment>> Cleaners and washers of glasses
Cleaner and windscreen washer

Fig. 7.57. Elements of a cleaner of a windscreen: 1 – the cleaner and washer switch;
2 – the lever and a screen wiper brush; 3 – a washer tank; 4 – the washer electric motor; 5 – washer hoses; 6 – the electric motor and the screen wiper mechanism


Elements of a cleaner of a windscreen are shown on fig. 7.57.

The electric motor of a cleaner of a windscreen
Removal

Fig. 7.58. A nut of fastening of a screen wiper with a brush


Remove levers of a cleaner with brushes, having turned away a fastening nut (fig. 7.58).
The moment of an inhaling of a nut of fastening of a screen wiper 18–23 Н·м.

Fig. 7.59. Removal of the top cover of a niche воздухозабора


Remove a sealant and the top cover of a niche воздухозабора (consists of two parts), having turned away four screws of fastening (fig. 7.59).

Fig. 7.60. Removal of the electric motor and the mechanism of a cleaner of a windscreen


Remove the electric motor and the mechanism of a cleaner of a windscreen, having turned away four bolts of fastening (fig. 7.60).
The moment of an inhaling of bolts of fastening of the electric motor and the mechanism of a cleaner of a windscreen 7–11 Н·м.
Installation is spent in an order, the return to removal.

Check of switching of speeds of rotation of the electric motor of a screen wiper
Separate a contact socket of the electric motor of a cleaner.

Fig. 7.61. Contacts of a socket of the electric motor of the mechanism of a cleaner of a windscreen: 1 – small speed; 2 – a great speed; 3 – "weight"; 4 – «+» (at the included ignition); 5 – an electromagnetic backspacing; 6 – it is not used


Connect the positive plug of the storage battery to contact «1» sockets of the electric motor, and the negative plug of the battery with contact «3» sockets of the electric motor (fig. 7.61).
Be convinced that the electric motor works on small speed.
Connect the positive plug of the storage battery to contact «2» sockets of the electric motor, and the negative plug of the battery with contact «3» sockets of the electric motor.
Be convinced that the electric motor works at great speed.
Check of automatic deenergizing
Include the electric motor on small speed.

Fig. 7.62. The scheme of connections at check of a mode of automatic deenergizing


Having disconnected contact «1» sockets (fig. 7.62), switch off the electric motor in any position, except position of an electromagnetic backspacing.
Connect among themselves contacts «1» and «5» sockets (fig. 7.62 see).
Attach the positive plug («+») the storage battery to contact «4» sockets of the electric motor, and the negative plug of the battery («–») to contact «3» sockets of the electric motor (fig. 7.62 see).
Be convinced that the electric motor stops in position of an electromagnetic backspacing.
Installation

Fig. 7.63. The sizes for installation of levers and brushes of screen wipers: А=40–50 mm; В=40–50 mm


Establish levers and cleaner brushes, observing the sizes specified in fig. 7.63.

Fig. 7.64. Installation of jets of a washer of a windscreen on points разбрызгивания a washing liquid


Establish jets of a washer of glass on 7.64 sizes specified in fig.

The electric motor of a washer of a windscreen
Removal and installation
Disconnect a wire from "a minus" conclusion («–») the storage battery.
Disconnect from a tank a hose of a washer and separate an electric motor socket.

Fig. 7.65. Bolts of fastening of a tank of a washer of a windscreen


Remove a washer tank, having turned away two bolts of fastening (fig. 7.65).
Installation is spent in an order, the return to removal.
Check of a technical condition
Without removing the electric motor from a washer tank, fill a tank with water.

Fig. 7.66. Contacts of a socket of the electric motor of a washer of a windscreen: 1 – a windscreen washer («+»); 2 – "weight"; 3 – a washer of back glass («+»)


Attach «плюсовый» («+») and "minus" («–») conclusions of the storage battery accordingly to conclusions 1 and 2 sockets of the electric motor (fig. 7.66) and be convinced that the electric motor works and that water is sprayed through washer jets.
Be convinced of normal work of the electric motor.

Cleaner and washer of back glass

Fig. 7.67. Elements of a cleaner of back glass: 1 – a cap and the plug; 2, 4 – nuts; 3 – facing; 5 – the lever and a screen wiper brush; 6 – a fastening bolt; 7 – the electric motor of the mechanism of a cleaner of glass; 8 – a fastening bolt


Elements of a cleaner of back glass are shown on fig. 7.67.

The electric motor of a cleaner of back glass
Removal and installation

Fig. 7.68. Removal of an upholstery of a door of a back (elements of fastening of an upholstery of a door of a back)


Turn away four screws and disconnect two holders of an upholstery of a door of a back (fig. 7.68).
Remove the cleaner lever, having turned away a fastening nut.
The moment of an inhaling of a nut of fastening of the lever of a cleaner 10–13 Н·м.
Remove facing of an axis of the lever of a cleaner and turn on шестигранную a fastening nut.

       THE NOTE
At installation of a cap and the arrow plug on them should be directed upwards.

The inhaling moment шестигранной nuts 10–14 Н·м.
Remove the electric motor of a cleaner of back glass, having turned away two bolts of fastening, and separate a contact socket.
The moment of an inhaling of bolts of fastening of the electric motor of a cleaner of back glass 7–11 Н·м.
Installation is spent in an order, the return to removal.
Check of a technical condition
Separate a socket of the electric motor of a cleaner of back glass.

Fig. 7.69. Contacts of a socket of the electric motor of the mechanism of a cleaner of back glass: 1 – «+» (at the included ignition); 2 – an electromagnetic backspacing (great speed); 3 – the switch; 4 – "weight"


Connect positive («+») and negative («–») plugs of the storage battery according to contacts «3» and «4» sockets of the electric motor (fig. 7.69).
Be convinced of normal work of the electric motor. At work infringement replace the electric motor.
Installation of the lever and cleaner brush

Fig. 7.70. The adjusting size of the lever and a screen wiper brush


Establish the lever and a cleaner brush so that the size And (fig. 7.70) was equal 43–53 mm.

Fig. 7.71. Installation of a jet of a washer of back glass on a zone разбрызгивания a washing liquid


Establish a jet of a washer of back glass according to 7.71 sizes specified in fig.

The electric motor of a washer of back glass
Removal and installation
Disconnect a wire from the negative plug of the storage battery.
Disconnect from a tank a hose of a washer and separate an electric motor socket.
Remove a washer tank, having turned away two bolts of fastening.
Installation is spent in an order, the return to removal.
Check of a technical condition
Without removing the electric motor from a washer tank, fill a tank with water.

Fig. 7.72. Contacts of a socket of the electric motor of a washer of back glass: 1 – a windscreen washer («+»); 2 – "weight"; 3 – a washer of back glass («+»)


Connect «плюсовую» («+») and "minus" («–») plugs of the storage battery accordingly to contacts «3» and «2» sockets of the electric motor (fig. 7.72) and be convinced that the electric motor works, and water is sprayed through a washer jet.
Be convinced of normal work of the electric motor.