Repair Hyundai Getz
Hyundai Getz. The maintenance+ 1. Operation and maintenance service
+ 2. The engine
+ 3. Transmission
+ 4. A running gear
+ 5. A steering
- 6. Brake system
The general data
Check and adjustment of elements of brake system
Working brake system
Lay brake system
Antiblocking system of brakes (ABS)
Possible malfunctions of brake system, their reason and ways of elimination
+ 7. An electric equipment
+ 8. A body
9. Electric equipment schemes
revision with AI
Hyundai Getz>> Brake system>> Lay brake system
|
Fig. 6.45. Lay brake system: 1 – the lever of a drive of lay brake system; 2 – a casing of the lever of a drive of lay brake system; 3 – an adjusting nut; 4 – a cable of a drive of the brake mechanism of the left back wheel; 5 – a cable of a drive of the brake mechanism of the right back wheel
|
The lay brake system is shown on fig. 6.45.
The lay brake system with a mechanical drive operates on brake mechanisms of back wheels. The drive of a lay brake consists of the lever, adjusting draught, the equalizer, приводных cables, levers of a drive brake колодок and разжимной laths with the built in mechanism of automatic adjustment of a backlash between a drum and колодками.
Removal
Remove the central console of the panel of devices.
|
Fig. 6.46. The lever of a drive of a lay brake: 1 – the lever of a drive of a lay brake; 2 – an adjusting nut; 3 – a cable of a drive of a lay brake; 4 – the equalizer; 5 – a casing
|
Ослабьте an adjusting nut also disconnect a cable of a drive of a lay brake (fig. 6.46).
Remove the switch of a control lamp of a lay brake.
Remove the lever of a drive of a lay brake, having turned away screws of its fastening.
Remove a back wheel.
Remove a brake drum.
Remove a nave of a back wheel.
Remove brake колодки.
Disconnect a cable from the drive lever колодок.
Remove a ring of fastening of a cable of a drive of a lay brake to a board of the brake mechanism (fig. 6.47).
Remove a cable of a drive of a lay brake, having weakened a fastening clip.
Check of a technical condition
Check up work of the switch of a control lamp of a lay brake.
Check up gear sector of the lever of a drive of a lay brake on deterioration presence.
Check up cables of a drive of a lay brake on presence of deterioration or damages.
Replace a cable in following cases:
– Cable tips are weakened;
– Cable threads have started to be torn;
– The cable hard moves in a cover even after its greasing.
Installation
Installation is spent in an order, the return to removal.
Before installation of a brake drum check up external diameter brake колодок (at established колодках).
External diameter brake колодок cars without antiblocking system of brakes (diameter of a drum of 7 inches) should be 179,5–179,0; the cars equipped with antiblocking system of brakes (diameter of a drum of 8 inches), – 202,2–201,7 mm.
Adjust a cable of a drive of a lay brake for what execute the following:
– About twenty times press a pedal of a brake with effort 10 кгс;
– Not less than three times against the stop lift the lever of a lay brake.
Having pulled for the lever of a lay brake upwards with effort 20 кгс, enclosed in a point located on distance of 25 mm from the end of the lever, an adjusting nut adjust a drive cable so that the lever of a drive of a lay brake moved on 6–8 teeth of sector.