Repair Hyundai Getz

Hyundai Getz. The maintenance
- 1. Operation and maintenance service
   Technical characteristics of cars
   The general data on the car
   Car identification
   Councils about car operation
   Car maintenance service
+ 2. The engine
+ 3. Transmission
+ 4. A running gear
+ 5. A steering
+ 6. Brake system
+ 7. An electric equipment
+ 8. A body
9. Electric equipment schemes



e49ad517

Hyundai Getz>> Operation and maintenance service>> Car maintenance service
While in service the car inevitably there are such processes, as easing of fastening of knots and units, deterioration of surfaces of a friction, infringement of adjusting parametres, ageing резинотехнических products and paint and varnish coverings. For the prevention of malfunctions and increase of reliability of the car scheduled preventive maintenance service which includes verifying, adjusting, lubricant works, and also replacement of separate details through certain run is provided.
This subsection is intended to help the motorist to support the car in good repair, to reduce the operational expense of fuel and oil, to prolong car service life. Here the general plan of scheduled preventive maintenance service of the car is resulted and maintenance service operations are in detail described. Maintenance service carrying out according to the plan will provide long and reliable service of the car.  
Here the full plan of maintenance service is resulted, therefore it is recommended to perform all operations with the specified periodicity. At service of the car you will notice that performance of some operations can be combined with carrying out of others is follows from an essence of operations of maintenance service. For example, if you have lifted the car for carrying out of any operation elements of system of release of the fulfilled gases can be checked up simultaneously with check of elements of a suspension bracket or a steering. Before the work beginning it is necessary to be prepared for maintenance service carrying out. Familiarise with the description of operation which you are going to execute, buy tools necessary for it and spare parts. If you have faced a problem which not in a condition to solve independently, address to experts.
Regular carrying out of all necessary operations of maintenance service will provide long and reliable work of the engine. If quality of work of the engine has worsened, it is necessary to perform described below operation.

Primary checks:
— Clear, examine and check up the storage battery;
— Check up level of oil and cooling liquid;
— Check up a condition and a tension of belts;
— Replace spark plugs;
— Examine a cover of the distributor of ignition, бегунок and high-voltage wires;
— Check up a condition of the air filter and replace it if it is necessary;
— Check up the fuel filter;
— Check up a condition of all hoses and examine them on leak presence.

If specified above operation have appeared inefficient, execute additional checks:
— Check up system of additional charge of the storage battery;
— Check up ignition system;
— Check up the power supply system;
— Replace high-voltage wires.

Visiting of servicing deport (car-care centre)
It is said that abroad the emergency car throw on road, and receive completely corrected at a threshold of own house. The insurance company potters with the car, it pays works, the owner often at all does not know, in what car-care centre and who was engaged in its restoration.
Sometime so will be and at us, but in most cases (especially if repair trust not to firm station) our owner, addressing in a repair truck, it is compelled to enter in long and at times difficult relations with its masters and mechanics. In relations from which as we know, quality of repair and its price often depends. Not a secret that the same master performs identical work with absolutely different quality. Also has put here not in a malicious will or mood of the executor, and that in ours is far not comfortable conditions repair of cars turns to work more often creative which result, among other things, strongly depends on that desire who will execute it, and that impression which will be made on it by the customer. There is even a private rule: what client – work is that also. And though the client is always right, its correctness makes different impact on a result. With what we happen? And how correctly to conduct itself, not to appear for nothing in all senses?
Sight from outside car-care centre.
Workers of workshops characterise the most typical clients and express to them the relation differently. Обобщенно the picture looks so.
The client - "fop". Comes by the car, обвешанной various "lotions" and "gadgets": additional headlights, stoplights, spoilers, active aerials etc. make impression that the main knots of its car not the motor and a transmission, and the tape recorder with columns. Masters of such clients do not love. As a rule, they are not capable to estimate all work spent for repair of a subject of their desire, but are ready to carp at a trifling scratch which ostensibly was not earlier.
Complete antithesis of fops – "hard workers". They are people, for which car not simply means of transportation, and existence means. These basically address to services of service for performance of those works which cannot make in the absence of the special tool or possibilities. They do not pay attention to minor defects, but are quite capable to make the present scandal if it will be found out that, say, to hermetic sealing of a cover of a head of the block have applied white hermetic, instead of the red high-temperature.
"Rationalizers". Their cars are supplied by additional filters, electronic proof-readers, омагничивателями gasoline, electric systems of protection of a body from the corrosion, "the heaped up" candles. Having addressed to services of service with the begun to knock engine demanding major repairs, such clients sincerely are surprised to that, appears, despite all aspects-modifiers with which they regularly filled in in the motor, oil needed to be changed all the same. Masters of the such do not respect.
Repair of cars of the "equestrians" who have got used on them only to go is very labour-consuming. Concerning visit to car-care centre as to visiting of the dentist (to go when absolutely will press), they start small illnesses to such degree that the car to throw out easier, than weigh it to treat. By such cars and nuts it is easier not to turn on, and at once to cut off "Bulgarian". These with interest learn that torn пыльник the SHRUS in a month leads to replacement of all knot. In the early spring in workshops there are careless "snowdrops", a version all same "equestrians". In their eyes a mute question: «Why even last autumn the car quickly ran, and now creaks, how not greased cart, speeds are not switched, and the engine is badly got?». They cannot understand that if not to spend car preservation many details of its suspension bracket, the engine, and a body from long parking under snow spoil more than from daily trips.
Special category – drivers-women. By their cars all procedural works, the engine pure, cars ухожены, as a rule, are regularly performed. It is difficult to women to estimate real danger of any scratch or knock, and they address in workshops at the slightest pretext. At times on trifles of type of replacement of the burnt down safety lock. Their cars do not deliver to mechanics of the big efforts, but masters glance at them haughtily.
In general, as it is easy to guess, workers of car-care centre concern practically all clients (in a shower precisely!) haughtily and scornfully-is indulgent. And not only at us. It speaks, probably, perception psychology: «They go for a drive, and we it саночки carry». There is even a saying:« The driver – only a lining between a wheel and a seat which should be changed first of all ». Rich and not so,« teapots "and" know-it-alls », quick-tempered, as gunpowder, and quiet, as tanks, – all of us outside of love and deep respect of those who twists to us nuts. Then whom if do not love then respect the master to whom they most qualitatively and diligently carry out repair? Most successfully, judging by our supervision, masters have relations with those who knows specificity of car repairs and represents, at least in general as as it is necessary to do. Thus such person is not obliged to be able itself« to twist nuts », but its knowledge and representations quite will suffice to understand, why it was necessary to make that, instead of another, than is caused deviation from a rule and the accepted canon, and the main thing – to it is difficult« to rub points ». He can always forgive an oversight or an error, but is capable to claim strictly for hack-work. He always knows, that wants, and is able to achieve it.
Well and if those skills are not present, how there is no desire (forces, time) to penetrate into specificity of repair, considering, what the car was bought not for this purpose? Then it is necessary to choose such firm car-care centre where quality is guaranteed by its high reputation and the rigid control from outside managements. But at us conversation now not about it. How itself to conduct? The councils resulted more low will help to avoid the characteristic errors influencing workmanship of works and their price.
It is necessary to be prepared for car-care centre visiting. Помойте the car. Especially in places of planned repair. Clean from it all superfluous. Disconnect the alarm system and turn away confidential nuts, having put them on a foreground. Cover seats with old covers, a pure rag or polyethylene. Some leave in a prominent place a small bottle of mineral water. It you show respect for people which will be engaged in your car. Try to facilitate carrying out of the future works in every possible way. If in the car there is an additional electric equipment (электростеклоподъемники, additions to ignition system, etc.), leave schemes or warn about their presence.
Be going to describe clearly those damages which should be eliminated, and ask to check up at you work of those knots which are subject to repair. Do not make the diagnosis and the more so do not give categorical recommendations. If you, for example, tell «pull a chain», having heard that it rustles, to you it is simply tense. And in some days will collapse успокоитель and all head of the block of cylinders will fail, for example. Ask the master most to listen to the engine (to look a suspension bracket) and solve together, it is necessary to replace what details necessarily and what to repair. Co-ordinate here the list of replaced elements and stipulate, who gets them. If service takes up responsibility for quality (especially difficult) details, it is better to charge their purchases to it even if it will increase repair cost a little. Buying details, choose the best from this that is available. Do not save on trifles – nuts, percussion caps, covers, "elastic bands" and in general all disposable details. Their replacement not only raises quality of repair, but also considerably simplifies it, and at the same time and cheers up to those who directly repairs. If you have no representation how this or that malfunction is eliminated, be not too lazy to open the instruction or the grant on repair and at least in general to penetrate into an essence of the matter. It will add to you of authority in the opinion of the mechanic, will force to work it more carefully, and to you will allow to supervise a course of works. If there is a possibility and desire, be present at repair or at least regularly enquire about its course. In the course of work there are many small questions: to do to do, change to change. It is better, if they dare at once. Besides, defects which will be then very difficult for eliminating are opened, and at present – is possible. For example, when change a wing or the back panel, the unattractive picture of corrosion of elements surrounding them opens (at cars, before subjected кузовному to repair), it is easy for eliminating on a course, but it is necessary to co-ordinate with the customer as it demands additional expenses from its party. Observe of work unostentatiously, be not above soul. Search and elimination of many "individual" malfunctions occurs a trial and error method, and nobody would like, that someone saw that he is mistaken. At the same time be ready to answer arising questions or something to explain to the master. He knows the car in general, and you – behaviour and background of this copy. Besides only you know, what oil is filled in in the engine and what a polyrole was used at body processing.
Quality of works try to supervise stage by stage. Small кузовной the defect which has been not stipulated in initial accounting to eliminate to a ground, than after painting much easier.
Stipulate at once a warranty period, an order of a presentation of claims. Especially many questions arise to quality of painting. For example, GOST supposes for this kind of works easy shagreen leather, presence small сорности, but does not suppose потеков a paint. Our council – do not demand very smooth surface. It is easy for receiving, having put a thin paint coat. Besides in this case will not arise потеков whereas the easy shagreen leather testifying to a thick layer, it is possible заполировать, and presence small потека even in an imperceptible place will allow to lower working costs essentially.
Nothing happens eternal, but you, for certain, will not arrange, if, say, a paint облезет right after the expiry of the term of the guarantee given to you. It will be better, if you buy (having consulted to those who with them will work) account materials and some specific means which can not be in an average level workshop. For example, if by your car sometime used silicone a polyrole, get special means for its removal. Some polyroles containing teflon, do not act in film anything, and it is necessary to delete all paint special смывкой. Anticorrosive грунты get only better quality, it is desirable two-componental эпоксидные about which it is known that they well are tested a salt fog.
Having addressed in a workshop the first time, think that visit here, for certain, will be not the last. Therefore take care of that the following repair delivered
Mechanics have less than inconveniences: ask the master to process before definitive assemblage carving and other connections by silicone greasing. It, as well as a universal getting liquid (type WD-40), it is better to have always in a luggage carrier.
Do not bargain after to you named a final price, but before ask to make detailed accounting by separate kinds of works. Here it needs to be discussed in more details to eliminate double payment of the same work. For example, if it is required to replace brake колодки and the brake cylinder, it is impossible to summarise automatically quotations for these works as for cylinder replacement it is already necessary to remove a wheel and, for example, a brake drum.
And the last. Do not try to put to the master in gratitude tip, and furthermore a vodka bottle. So it was accepted, when its salary made 5–6 % of that you paid in cash desk. Today its earnings together with awards and other payments appear more than half of sum paid by you. Find other possibilities to show to it the respect and gratitude. For example, present any souvenir or something something like that.

Table 1.7 and
Periodicity of maintenance service and the name of works
The name
Years/run, thousand in km
1/15
2/30
3/45
4/60
5/75
6/90
7/105
7/105
9/135
10/150
Motor compartment
Belts of drives
П
П
П
П
П
П
П
П
П
П
The high-voltage
System wires
Ignitions

П

П

П

П

П
Hoses and engine branch pipes
П
П
П
П
П
П
П
П
П
П
Drive belt
ГРМ



З



З


Spark plugs:
The usual
The platinum


З


З
З


З


З
З


З
The cooling
Liquid
П
П
З
П
П
З
П
П
З
П
Liquid of a hydrodrive of brakes and coupling
П
З
П
З
П
З
П
З
П
З
The air
The filter
П
З
П
З
П
З
П
З
П
З
Electrolit of the storage battery
П
П
П
П
П
П
П
П
П
П
The fuel
The filter: gasoline



З



З


Works Under the car
Suspension bracket details
(Including protective covers), spherical support,
Fixing bolts
П
П
П
П
П
П
П
П
П
П
Protective covers
SHRUS
П
П
П
П
П
П
П
П
П
П
Hinges and protective covers of a steering, hydraulic booster liquid
П
П
П
П
П
П
П
П
П
П
Oil in МКП
(Everything, except Н1)
П
П
П
П
П
З
П
П
П
П
Oil in МКП (Н1)
П
П
З
П
П
З
П
П
З
П
Oil in a distributing box
П
П
З
П
П
З
П
П
З
П
Oil in differentials
П
П
З
П
П
З
П
П
З
П
Fastening bolts карданного a shaft
П
П
П
П
П
П
П
П
П
П
Tightness of system of release
П
П
П
П
П
П
П
П
П
П
Works in car salon
Free wheeling of pedals of coupling and brake
П
П
П
П
П
П
П
П
П
П
The lever of a lay brake
П
П
П
П
П
П
П
П
П
П
The air filter of system of ventilation
З
З
З
З
З
З
З
З
З
З
Works outside of the car
Check of wheels and tyres, pressure and deterioration, the moment of an inhaling of wheel nuts
П
П
П
П
П
П
П
П
П
П
Tightness of hoses of brake system
П
П
П
П
П
П
П
П
П
П
Brake колодки, disks and drums
П
П
П
П
П
П
П
П
П
П
Tightness of pipelines of the power supply system
П
П
П
П
П
П
П
П
П
П
Works on the car with the Heated-up engine
Oil in АКП
П
П
П
П
П
З
П
П
П
П
Engine oil and фильтр*
З
З
З
З
З
З
З
З
З
З
Check CO and CH in the fulfilled gases
П
П
П
П
П
П
П
П
П
П
Check дымности the fulfilled gases
П
П
П
П
П
П
П
П
П
П
Additional works
Door-locks, Loops, clamps
П
П
П
П
П
П
П
П
П
П
Screen wipers, washers of headlights and glasses
П
П
П
П
П
П
П
П
П
П
Lighting devices
П
П
П
П
П
П
П
П
П
П
The motor-tester
П
ПЗ
ПЗ
ПЗ
ПЗ
ПЗ
П
ПЗ
ПЗ
ПЗ
Convergence-disorder
П
ПЗ

ПЗ

ПЗ

ПЗ

ПЗ
*При a condition of use of engine oil with index API not more low SG for petrol engines. The maximum excess of run in relation to regulated (the top line of the table) should not exceed 2000 km or 2 months of operation.
Symbols: П – check (survey), З – replacement, ПЗ – check (survey) and replacement at necessity (depending on results of check), recommended operation is carried out at servicing deport in coordination with the owner of the car.

Table 1.7
Periodicity of maintenance service and the name of works
The name
Years/run, thousand in km
11/165
12/180
13/195
14/210
15/225
16/240
17/255
18/270
19/285
20/300
Works in a motor compartment
Belts of drives
П
П
П
П
П
П
П
П
П
П
High-voltage wires of system of ignition

П

П

П

П

П
Hoses and engine branch pipes
П
П
П
П
П
П
П
П
П
П
Belt of drive ГРМ

З



З



З
Spark plugs:
The usual
The platinum


З
З


З


З
З


З


З
З
Cooling liquid
П
З
П
П
З
П
П
З
П
П
Liquid of a hydrodrive of brakes and coupling
П
З
П
З
П
З
П
З
П
З
The air filter
П
З
П
З
П
З
П
З
П
З
Electrolit of the storage battery
П
П
П
П
П
П
П
П
П
П
The fuel filter: gasoline

З



З



З
Works under the car
Suspension bracket details
(Including protective covers), spherical support,
Fixing bolts
П
П
П
П
П
П
П
П
П
П
Protective covers of SHRUS
П
П
П
П
П
П
П
П
П
П
Hinges and protective covers of a steering, hydraulic booster liquid
П
П
П
П
П
П
П
П
П
П
Oil in МКП (everything, except Н1)
П
З
П
П
П
П
П
З
П
П
Oil in МКП (Н1)
П
З
П
П
З
П
П
З
П
П
Oil in a distributing box
П
З
П
П
З
П
П
З
П
П
Oil in differentials
П
З
П
П
З
П
П
З
П
П
Fastening bolts карданного a shaft
П
П
П
П
П
П
П
П
П
П
Tightness of system of release
П
П
П
П
П
П
П
П
П
П
Works in car salon
Free wheeling of pedals of coupling and brake
П
П
П
П
П
П
П
П
П
П
The lever of a lay brake
П
П
П
П
П
П
П
П
П
П
The air filter of system of ventilation
З
З
З
З
З
З
З
З
З
З
Works outside of the car
Check of wheels and
Tyres, pressure and deterioration, the moment of an inhaling of wheel nuts
П
П
П
П
П
П
П
П
П
П
Tightness of hoses of brake system
П
П
П
П
П
П
П
П
П
П
Brake колодки, disks and drums
П
П
П
П
П
П
П
П
П
П
Tightness of pipelines of the power supply system
П
П
П
П
П
П
П
П
П
П
Works on the car with the heated-up engine
Oil in АКП
П
З
П
П
П
П
П
З
П
П
Engine oil and фильтр*
З
З
З
З
З
З
З
З
З
З
Check CO and CH in the fulfilled gases
П
П
П
П
П
П
П
П
П
П
Check дымности the fulfilled gases
П
П
П
П
П
П
П
П
П
П
Additional works
Door-locks, loops, clamps
П
П
П
П
П
П
П
П
П
П
Screen wipers, washers of headlights, glasses
П
П
П
П
П
П
П
П
П
П
Lighting devices
П
П
П
П
П
П
П
П
П
П
The motor-tester
П
ПЗ
ПЗ
ПЗ
ПЗ
ПЗ
П
ПЗ
ПЗ
ПЗ
Convergence-disorder
П
ПЗ

ПЗ

ПЗ

ПЗ

ПЗ
*При a condition of use of engine oil with index API not more low SG for petrol engines. The maximum excess of run in relation to regulated (the top line of the table) should not exceed 2000 km or 2 months of operation.
Symbols: П – check (survey); З – replacement; ПЗ – check (survey) and replacement at necessity (depending on results of check). Recommended operation is carried out at servicing deport in coordination with the owner of the car.